Industry News & Engineering Insights
Explore the latest articles on architectural hardware standards, precision engineering, access control technologies, and global project case studies from TOPTEK.
Access Control Battery Backup Runtime Planning for Electronic Door Locks
Access control battery backup runtime depends on the loads that remain powered during an outage, their operating pattern and the usable capacity...
Read Article
Multipoint Lock Handing and Latch Reversal for Door Manufacturers
Multipoint lock handing and latch reversal should be agreed through a door drawing and the exact lock instructions. A left or right...
Read Article
Vertical Rod Exit Device Floor Strike Checks Before Installation and Handover
A vertical rod exit device floor strike should be selected and positioned against the finished opening, the bottom latch and the manufacturer's...
Read Article
Access Control Door Forced Open Alarm: Diagnose False Events at the Opening
An access control door forced open alarm is a controller's interpretation of an opening event. It is not, by itself, proof that...
Read Article
Multipoint Lock Extension Compatibility: Connectors, Drive Travel and Tall-Door RFQs
A taller door does not automatically need a longer version of the same multipoint lock. It may require a different complete assembly,...
Read Article
Panic Bar Projection and Door Stop Clearance: Check the Full Door Swing
A panic bar can fit the width of a door and still collide with the wall when the leaf opens. For door...
Read Article
Australian Mortice Lock Fixing for Timber and Metal Doors: Support, Fasteners and Order Checks
TL;DR: define what supports every fixing Specify the actual door construction, not only the description timber or metal. Distinguish lockcase mounting, decorative...
Read Article
Euro Mortise Lock for Rebated Double Doors: Meeting Stiles, Rebate Kits and Closing Checks
TL;DR: specify the meeting stiles as an assembly A rebated double door has overlapping meeting-edge geometry; show both leaves in the lock...
Read Article
ANSI Mortise Lock Cylinder Loose: Retention, Trim Movement and Service Checks
TL;DR: identify the moving part before ordering a repair Separate normal key-plug rotation from movement of the cylinder body, surrounding ring or...
Read Article
Australian Mortice Lock Electric Strike Compatibility: Latch Geometry and Release Checks
TL;DR Confirm the exact mechanical mortice lock and electric strike as one proposed combination. Review latch geometry, auxiliary contact, frame space and...
Read Article
Euro Mortise Lock Bolt Through Fixings: Hole Alignment and Furniture Compatibility
TL;DR Match the furniture fixing pattern to the exact lockcase drawing before ordering. Check the complete screw or sleeve path, including its...
Read Article
ANSI Mortise Lock Deadlatch Alignment: Auxiliary Latch and Strike Checks
TL;DR Identify whether the specified lock includes an auxiliary deadlatch before evaluating its strike. Check the main latch pocket and the auxiliary...
Read Article