Industry News & Engineering Insights
Explore the latest articles on architectural hardware standards, precision engineering, access control technologies, and global project case studies from TOPTEK.
Electronic Mortise Lock Commissioning Checklist: Entry, Egress, Monitoring and Power-Loss Tests
TL;DR Commission the complete electronic opening, not the lock in isolation. Verify door preparation and mechanical movement first. Then test normal secured...
Read Article
Multipoint Lock for Timber Door vs Aluminium Door: Profile Depth, Faceplate, Reinforcement and Fixing Guide
TL;DR Select a multipoint lock from the actual door section, not the material name alone. Timber doors require a controlled edge recess,...
Read Article
Panic Bar Maintenance Checklist: Fasteners, Touch Bar, Latch, Strike and Door Alignment
TL;DR Inspect a panic bar as part of the complete opening. Confirm the door closes freely, then check visible fasteners, covers, touch-bar...
Read Article
Electronic Mortise Lock Wiring Guide: Voltage Drop, Door Power Transfer, Conductors and Connector Planning
Electronic Mortise Lock Wiring Guide: Voltage Drop, Door Power Transfer, Conductors and Connector Planning TL;DR Electronic mortise lock wiring should be designed...
Read Article
Multipoint Lock Cylinder and Handle Compatibility Guide: Centres, Spindle, Cam and Deadlocking Sequence
Multipoint Lock Cylinder and Handle Compatibility Guide: Centres, Spindle, Cam and Deadlocking Sequence TL;DR A multipoint lock, cylinder and handle set must...
Read Article
Panic Bar Dogging Function Guide: Mechanical Hold-Open, Cylinder Control and Fire-Door Boundaries
Panic Bar Dogging Function Guide: Mechanical Hold-Open, Cylinder Control and Fire-Door Boundaries TL;DR Dogging is a hold-open or latch-retracted operating mode found...
Read Article
Electronic Mortise Lock Monitoring Guide: Door Position, Latch, Deadbolt and REX Signals
Electronic Mortise Lock Monitoring Guide: Door Position, Latch, Deadbolt and REX Signals TL;DR Door position, latch status, deadbolt position and request-to-exit are...
Read Article
Automatic Multipoint Lock Troubleshooting Guide: Trigger, Keeps, Compression and Lock-Point Alignment
Automatic Multipoint Lock Troubleshooting Guide: Trigger, Keeps, Compression and Lock-Point Alignment TL;DR When an automatic multipoint lock does not project or retract...
Read Article
Panic Bar Door Preparation Guide: Device Height, Strike, Reinforcement and Outside Trim Coordination
Panic Bar Door Preparation Guide: Device Height, Strike, Reinforcement and Outside Trim Coordination TL;DR Do not machine a door from a product...
Read Article
Electronic Mortise Lock Power-Loss Guide: Fail-Safe, Fail-Secure and Monitoring
Electronic Mortise Lock Power-Loss Guide: Fail-Safe, Fail-Secure and Monitoring TL;DR Fail-safe and fail-secure describe the intended state of a controlled lock function...
Read Article
Multi Point Door Lock Replacement Guide: Measure Centres, Backset, Faceplate and Lock Points
Multi Point Door Lock Replacement Guide: Measure Centres, Backset, Faceplate and Lock Points TL;DR A reliable multi point door lock replacement needs...
Read Article
Panic Exit Device Outside Trim Guide: Cylinder, Lever, Pull and Re-entry Planning
Panic Exit Device Outside Trim Guide: Cylinder, Lever, Pull and Re-entry Planning TL;DR The inside push bar must preserve the approved egress...
Read Article