Product Description
The TOPTEK TKAMCL2000 is an ANSI Grade 2 commercial cylindrical leverset with separate rose-chassis and lock-body construction. The series offers 5-pin or 6-pin removable-core configurations, reversible handing and selectable commercial lock functions. It provides a Grade 2 option for door manufacturers, lock brands and distributors comparing our commercial cylindrical locks.
Start with the required function and door preparation. Then confirm the door thickness, cylinder, backset and strike. Specify an FW variant when a freewheeling clutch is required for a function that supports it.
Key Features
- Separate rose-chassis and lock-body construction
The TKAMCL2000 combines cylindrical-lock functions with a construction designed for straightforward bored-door installation. - Optional FW freewheeling versions
The series function schedule identifies the functions offered with an FW clutch option. Specify the FW designation with the selected function; the standard and FW versions have different locked-lever behavior. - Removable cylinder options
Choose a 5-pin or 6-pin removable core and specify the keyway. An IC-core option and construction-keyed or master-keyed arrangements are available for the selected configuration. - Supported lever mechanism
Two-sided spindle support, compression springs and an individual spring on each side support lever alignment and return. - Reversible latching and installation options
The reversible latch uses stainless-steel latching components. Concealed screw mounting and an optional removable through-bolt support installation planning.
Technical Specifications
| Series | TKAMCL2000 cylindrical leverset |
|---|---|
| Standard / grade | ANSI/BHMA A156.2 Grade 2, as specified in the TOPTEK 2026 catalogue. |
| Door preparation | 2-1/8 in. cross bore; 1 in. edge bore; 1-1/8 in. x 2-1/4 in. latch face. |
| Backset | 2-3/4 in. standard; 2-3/8 in. optional. |
| Door thickness | 1-1/2 in. to 2 in. standard; 1-3/8 in. to 1-3/4 in. option. Specify door thickness when ordering. |
| Cylinder | 5-pin or 6-pin removable core; interchangeable-core (IC) option available. |
| Keyway options | Schlage C, Kwikset and other options; specify the required keyway and cylinder configuration. |
| Handing | Completely reversible. |
| Latch and faceplate | Stainless-steel latchbolt and faceplate; 1/2 in. latch throw. |
| Faceplate options | 1-1/8 in. x 2-1/4 in. square corner standard; round corner and other options available. |
| Strike | 2-1/4 in. full-lip square-corner strike standard; round-corner and T-strike options available. |
| Freewheeling option | FW clutch variants are available for the functions identified in the TKAMCL2000 function schedule. |
| Finishes | US3, US4, US10B, US15, US26 and US26D. Confirm the finish with the order. |
Available Lock Functions
These functions are listed for the TKAMCL2000 series. Check the standard or FW operating version against the door schedule.
| F75 – Passage | Both levers remain unlocked. |
|---|---|
| F76 – Privacy | Inside push button locks the outside lever; release by outside emergency release, inside lever operation or closing the door. |
| F81 – Entrance / Office | Turn/push-button locking, with different key and inside-lever release behavior for each button mode. |
| F82 – Entrance / Office | Push-button locking; release by key or inside lever operation. |
| F84 – Classroom | The outside lever is locked or unlocked by key; the inside lever remains unlocked. |
| F86 – Storeroom | Outside entry by key; the outside lever cannot be left unlocked. The inside lever remains unlocked. |
| F77 – Patio | Inside push-button control of the outside lever; release by inside lever operation or closing the door. |
| F80 – Communicating | A key in either lever independently locks or unlocks that lever. |
| F89 – Exit | Inside lever operates the latch; outside lever does not operate the latch. |
| F87 – Institutional | Key-operated entry and exit; both levers are fixed in the standard version. FW option is identified in the function schedule. |
| F91 – Store door | A key from either side locks or unlocks both levers together. |
| Single dummy trim | Lever trim for one side of a door. |
FW variants are identified in the catalogue for F87, F81, F82, F76, F86 and F84. Additional entrance / office and connecting-room / exit configurations are also shown. Confirm the exact operation before ordering. F87 requires a key for entry and exit.
Typical Applications
- Office and administration doors specified for Grade 2 cylindrical hardware.
- Classrooms requiring outside key-controlled locking.
- Storerooms requiring key-controlled outside entry.
- Passage, privacy and communicating doors, according to the selected function.
Benefits
- A separate Grade 2 series with its own door-thickness and cylinder options.
- Standard and selected FW versions for different locked-lever requirements.
- Multiple functions, backsets and finish choices for coordinated commercial door orders.
Specification and Ordering Support
Specification reference: TOPTEK 2026 catalogue, TKAMCL2000 series. The catalogue identifies ANSI/BHMA A156.2 Grade 2. For a fire-rated opening, include the required door construction and rating so the applicable model-specific documentation can be confirmed.
Request TKAMCL2000 specifications, drawings, samples or a quotation. Include the required function, standard or FW version, door thickness, backset, 5-pin / 6-pin or IC-core arrangement, finish, target market and quantity.
If the door schedule calls for Grade 1, compare the TKAMCL5000 Grade 1 cylindrical lock. Browse the complete ANSI commercial door lock range for other lock constructions.